The Fluke 424D lets one person measure distance, area and volume quickly and accurately, without a tape or a second pair of hands. Point, press and read: it measures up to 100 metres to within 2 millimetres, and its tilt sensor works out heights and lengths you can’t reach directly.
As a result, it is ideal for site surveys, quantity take-offs, setting out and property measurement in Calabar. It is also checked before every hire.
Key specifications
- Range up to 100 m
- Accurate to within 2 mm
- Tilt sensor, so you can measure heights and lengths around obstructions
- Dust- and splash-resistant to IP54
- Stores your last 20 readings
- Tripod mode, so long-distance readings stay steady
What it’s for
- Measuring rooms and buildings for drawings and valuations
- Quantity take-offs for blocks, tiles, paint, POP and plaster
- Checking setting out and building dimensions
- Measuring heights when you can’t reach the top
- Measuring rooms for rental listings and floor plans
Faster, more reliable take-offs
Measuring a building with a tape takes two people, and errors also creep in on long runs. With the 424D, however, one person can measure every wall, calculate floor and wall areas, and recall recent readings in seconds. That makes quantity take-offs quicker and more reliable, and helps you order the right amount of material.
Tips for accurate readings
Measure from a solid, flat surface and check which end of the meter you’re measuring from before you start. Outdoors in bright light the laser dot is harder to see over long distances: use the tripod mode, aim at a light-coloured target, and work in shade where you can.
Using it safely
- Never look into the laser or point it at anyone’s eyes.
Pairs well with
Our cross-line laser level for setting out, and our Garmin handheld GPS for land inspections.
How hire works
- Quote: Tell us on WhatsApp what you’re measuring, where the job is and your dates, and we’ll then confirm availability and send a written quote.
- Checks and agreement: Before release, we ask for valid ID, a phone number we can verify and the site address. You then sign our hire agreement and pay, and some items also carry a refundable deposit.
- Handover: We check the distance meter with you and record its condition on a checklist you countersign, so there’s no dispute later. You can then collect it from our depot, or we deliver it on our own truck.
- Support on hire: If it develops a fault in normal use, call us so we can repair or replace it.
- Return: When the job is done, we collect it or you bring it back, and we inspect it again before settling any deposit.
Frequently asked questions
How accurate is it? To within 2 mm in normal conditions, so it’s more than enough for take-offs, valuations and checking setting out.
Can it calculate areas and volumes? Yes. It calculates area and volume from your measurements, and its tilt sensor also gives heights indirectly.
How long can I hire it for? By the day or by the week, so you only pay for the time you need.
What happens if it gets damaged? Tell us straight away so we can help. When equipment develops a fault in normal use, we repair or replace it. However, misuse damage, missing parts and late returns are charged under the hire agreement. An optional Equipment Protection Fee is also available when you book.
Get a quote
Message us on WhatsApp or call +234 903 598 9415 and tell us what you’re measuring, where the job is and your dates, so we can send you a written quote. You can also visit our depot at the HENSS Building, 24/26 Murtala Mohammed Highway, Calabar, or contact us online.





